Introduction
The UBEC is an external switching mode DC-DC regulator; it draws the DC voltage from 2-6S Lipo battery, drops it to a voltage level that is suitable for receivers and other electronic devices, and keep providing the stable current output up to 10Amp. As the UBEC has such a powerful output capability, so it is particularly applicable for large helicopters and fixed-wing aircrafts.


Features
1 It adopted the advanced DC-DC regulator chip with conversion efficiency exceeds 90%;
2 4 options for the output voltage, applicable for all kinds of receivers/gyros/servos, etc.
3 It owns BEC shoot-through protection, which prevent the input voltage from directly flowing to the output end and causing damages to receivers, servos and other electronic devices;
4 It featured other protections like over-current protection, short-circuit protection (at the output end) and thermal protection make the use more safe and reliable;
5 Two cables are connected in parallel at the output end of the UBEC, allow larger current to flow into the receiver.  
6 It has one status LED, which lights up when the output voltage is within the normal range;
7 The external switch can turn on/off the UBEC easily;
8 Exquisite aluminum case is helpful for heat dissipation & EMI (Electromagnetic Interference) reduction.  

Hobbywing Electronic Power Switch

Battery Type: LiPo / LiFe / NiMH;
Input Voltage: 2S LiPo / 2S LiFe / 5S NiMH;
Max. Current: 12A;
Size: 26.5mm x 19.7mm x 10.5mm (L*W*H);
Weight: 7.5g;

Includes:
1 x electronic power switch

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.