Features：

●Super fine and smooth touch of speed controlling, first-rate accurate linearity and quick-respond speed of throttle.
●With High Performance CPU of 24MHZ, Separate voltage regulator IC for MCU (Micro Controller Unit), high capability of anti-interference to decrease the possibility out of control. 
●Low-voltage cut-off protection of battery, blocked rotation protection and throttle signal lose protection, etc. All these functions can prolong the service life of ESC effectively. 
●Good and safe performance of power-on. The motor won’t be started no matter which position the throttle stick is on when the battery is connected. 
●Low torque "soft start," protecting gear box
●LED status indicator (LED keep shine under full throttle)
●Easy Installation, can change motor rotation direction by Prog-card
●Compatible for fixed wing airplane and helicopter; perfect governor mode for helicopter
●BEC circuit，SBEC output 6A
●With new generation MOSFET, lower internal resistance, stronger resistance to impulse current 
●MOSFET in independent PCB, the thickness of copper plate reaches 800μm, the thickness of high current ESC copper plate reaches 1200μm). Super low impedance and strongest resistance to high current which could effectively reduce the temperature rise, improve the quality and make the ESC work at optimal efficiency
●It can be compatible with a programming card (optional component), which has a simple and visual surface so as to change the parameters conveniently at any time anywhere (reference to the manual for programming card).

- Microprocessor controlled

- Integrated the function of flying data logger, could recording the flying data as: Current, Voltage, Temperature, RPM, Power, Throttle travel etc.

- Programmable the parameters of ESC through USB cable connected to computer

- High rate adjustable switching (PWM:8KHz/12KHz/16KHz)

- Programmable low voltage cutoff

- Programmable cutoff types(soft cutoff/hard cutoff)

- Programmable brake type(disable/soft brake/hard brake)

- Time advance programmable (low/standard/high)

- Programmable current limiting(very sensitive/standard/insensitive/disable)

- Governor mode(low rpm governor/high rpm governor)

- Programmable startup type(very soft start/soft start/fast start)

- Thermal Protection(100 centigrade)

- Apply to most of inrunner and outrunner brushless motors.

- No complex programming, auto adapt work mode.

- A LED (flashes) indicates full throttle.

- Safe “power on” arming program ensures motor will not accidentally turn on.

- Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.

- The ESC is disabled when the voltage is over 15v at power-on.

* Compatible with a programming card to change and set parameters easily and conveniently
* Super fine and smooth touch of speed controlling, first-rate accurate linearity
* Soft Start-up mode and Constant RPM mode (Governor mode)
* adjustable F3A brake.
* 3 steps adjustable regular back EMF brake.
* High capability of anti-interference
* Low-voltage cut-off protection for per cell battery
* Under-voltage cutoff
* Under-voltage can be disabled
* Under-voltage with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4
* Variable cutoff voltage / cell
* Slow down instead of cutoff
* Active freewheeling circuit
* LED status display
* Timing of motor ranges from 0° to 30°
* Blocked rotation protection
* Reversible rotation direction
* Over-temperature protection and Overload alarm
* Anti sparkling circuit: reduces connection sparkles
* Throttle signal lose protection. When the signal loses for 3 seconds, the power will automatically cut off.
* Safe power-on. The motor won’t start no matter which position the throttle stick is when battery connected
***This series ESC can be compatible with both helicopter and airplane.***