● Input voltage: DC 11V~15V. At 12V the maximum working current is 4.0A.
● Charging current is 0.5A~4.0A. By pressing the button on the panel, adjustment is made initiating from 0.5 amp.
● The parallel charging mode is to enable4 separate Li-ion cells having the parallel charging function at the same time.
● While connecting the EX-4 Cascade Charging Dock, each battery pack is therefore being charged automatically without having to operate manually.
● The LCD screen indicates the relevant charging status for these4 cells as well as its relevant voltage and current.
● The built-in fan performs its detecting functions while the buzzing alarm is activated should fault occurs.
● The operating temperature: 0~40℃
DN POWER G3 (6S4A) Li-Ion / Li-Polymer charger is a high-performance parallel charger. It will monitor voltage and charging current of each cell in real time, with 24-digit A/D converter accuracy. In addition, it can measure and record data during a controlled discharge and communicate charging and discharging data to your computer.
Its powerful software can download charging and discharging history and curves, as well as adjust some of the G3's settings. This allows you analyze battery capacity and monitor changes in your batteries performance.
1. Charging Features :
* Charges 1-6 cell Li-Ion / Li-Polymer battery in parallel (monitors and controls voltage and current to each cell)
* Charging current is adjustable from 0.5A to 4A in .5 A steps
* Real time display of each cells charging current (A) or charged capacity (mAh) on the LCD screen.
* Charger will automatically stop charging and signal (beep) when all cells are completely charged.
* Can save the last 256 charging records, including charged capacity and end of charge status of each cell.
* Saves the charging curve of each cell during last charging.
* Safety protection for reversed polarity.
2. Discharge Features:
* Discharge up to 10-cell (37 V) Li-poly battery.
* Adjustable Cut-off voltage and discharging current. (Maximum discharge power is 50W)
* LCD display Shows discharging time and voltage and discharged capacity.
* Discharging curve can be viewed on computer.
3. PC Communications:
* High speed USB connection.
* Display last charging record including charging curve.
* Adjust charger settings.
* Control online discharging, analyze battery’s capacity and display discharging curve.
●Specs
Description: G.T. POWER A6 BALANCE CHARGER/DISCHARGER
Operating voltage range: 10.0-18.0Volt
Circuit power: Max 50W for charging
Max 5W for discharging
Charge current range: 0.1-5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-Po: 300mAh/cell
NiCd/NiMH battery cell count: 1-15 cells
Li-ion/Polymer battery cell count: 1-6 series
Pb battery voltage: 2V,20V
Net weight: 400g
Dimensions: 165×130×45mm
03/24/2008
New Arrival:Ezrun series brushless ESCs & motors for cars.
●Specs
This is the G.T. Power A8 1-8S Fast Charging Intelligent Digital Multifunctional Balance Charger/Discharger
●Optimized operating software
●High-power and high-performance circuit
●Balance individual cells on discharge
●Accept various types of Lithium battery: A8 can accept three types of Lithium batteries - Lolo, Lipo and LiFe.
●Lithium battery 'Fast' and 'Storage' mode: You can charge Lithium battery for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage' mode controles the final voltage of the battery to be suit for long time storage.
●Maximum safety.
●Data store/load
●Cyclic charging/discharging
●PC based analysis using USB communication
●Multi-use wires
