Snapper6 65mm Micro FPV Racer Quadcopter (Frsky Receiver Edition)

Features:
- Betaflight support , multi flight mode: ACRO/AIR/ANGLE
- Powerful Brushless motor and Smooth ESC
- CNC aluminum alloy propeller guard
- Betaflight OSD support ,easy to get RSSI , Voltage and other info from your goggles
- Adjust the settings and the PID of the flight controller via OSD

Snapper6 65mm Micro FPV Racer Quadcopter (Frsky Receiver Edition)

Brand name: Happymodel

Item name: Snapper6 FPV racing Drone

Wheelbase: 65mm

Receiver: Compatible Frsky receiver / Compatible Flysky Receiver

Size: 81mm*81mm*36mm

Items	Specifications
SE0603 19000KV brushless motor	Configu-ration: 9N12P Stator diamter: 6mm Stator length: 3mm Shaft diameter: Φ0.8mm Motor dimension(Dia.Len): Φ9mm15.5mm Weight(g): 1.7g No.of cells(Lipo): 1S
Crazybee F3 flight controller	Firmware: Betaflight_3.3.0_Crazybee MCU: STM32F303CCT6 (72MHZ, 256K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Board weight: 3.5g Power supply: 1S battery input (DC 3.5-4.35V) Built-in 5A(each) Blheli_S 4 in 1 ESC Dshot600 ready Built-in Frsky receiver with telemetry (D8/D16 switchable) Built-in Betaflight OSD (SPI Control) Built-in Current meter Max 14A Built-in 5V 0.8A BEC with LC filter Built-in voltage detection BLHELI_S pass-through ready Heading LED ready
BLHeli_S 5A 4 in 1 ESC	Power supply: 1S LiPo/LiPo HV (4.2v/4.35v) Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_L_5_REV16_6.HEX Default protocol: DSHOT600
Frsky receiver version	SPI BUS receiver Frsky D8/D16 switchable Compatible both of Non EU and EU LBT transmitter Channels: 8ch or 16ch Failsafe support No ground interference (Transmitter and receiver 1m from the ground): 300m
AIO Camera & VTX	Output power: 25mw Frequency: 48CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Camera resolution: 700TVL Field of view: 120° Video format: NTSC Antenna: RG178 antenna Frequency: 5.8GHz 6 bands 48 channels With raceband: 5474 5945 MHZ Size: 13.9"12.0mm (L*W) Weight: 3g

Features:

Betaflight support, multi flight mode: ACRO/AIR/ANGLE.

Powerful brushless motor and smooth ESC.

CNC aluminum alloy propeller guard.

Betaflight OSD support, easy to get RSSI, voltage and other info from your goggles.

Adjust the settings and the PID of the flight controller via OSD.

Frsky version support both EU LBT and NON-EU Frsky transmitter.

Full telemetry function ready.

Head lights ready.

Camera angle adjustable.

Real Bind and Fly version.

Includes:
- 1 x Snapper 6 Frame
- 1 x Crazybee F3 FC (Frsky)
- 4 x SE0603 KV19000 Motor
- 1 x 31mm 3-blades propeller(4cw+4ccw)
- 1 x AIO Camera & VTX
- 1 x USB Lipo/LIHV Charger
- 1 x Propeller disassemble tool
- 1 x Screwdriver

Requires:
1 x 1S Lipo battery (recommended type: 450mah, 30C, size: about 60x18x7mm)

* Battery is NOT included, we provided 2 compatible connectors with the kit.

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.

Upload Image:
(Up To 5 Files, only .jpg/.gif/.png files are accepted and sizes below 2MB for each)

Post as: Review Question

Select grade: star(s)

Anonymous: Yes No