28 poles. High torque. High efficiency. Specifically designed for Multi Rotor.It also can be used for Remote control aircrafts.

Model: XM5015TE-4
KV: 570RPM/V
Weight: 160g
Diameter: 50mm
Length: 36.5mm
Diameter of Shaft: 6mm
Mounting holes pitch: 19/25mm
Slots,Poles: 24, 28
Idle Current(Io) @10V: 1.7A
Resistance(Ri): 27.4mOhm
Cruising power[8 mins]: 421.21W
Bursts current[15s]: 51.75A
Peak power[15s]: 765.84W
Recommended ESC: XC6018BA
Setup 1 (No. of Cell, Prop.): 4S, up to 16x5
Setup 2 (No. of Cell, Prop.): 5S, 14x7
Max. weight of 4-rotor copter: 4.21kg
Max. weight of 3D models: 1.40kg
Memo: 4KG 4-rotor copters, 30E 3D airplanes

*HINT: THE KV PRINTED ON THE PACKING OR MOTOR ARE THEORETICAL/CALCULATED KV, THE KV NUMBER ON THE BELOW SPEC SHEET IS REAL TEST KV, SO THE KV IN THE BELOW TABLE WILL TAKE PRIORITY, AND IT IS NORMAL THAT IF THE KV ON THE PACKING OR MOTOR IS DIFFERENT TO THAT LISTED ON THE BELOW TABLE.

Includes:
1 x motor
1 x prop adaptor
1 x motor mount
4 x prop adaptor screws

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.