Choose other components to build your saving combo:
Features:
HiModel FLY Seires 40A Brushless Speed Control With Governor function for Helicopter Type Heli-FLY-40A
● Easy to configure and operate, special designed for electric helicopters, working voltage 6 to 16V.
● Prog-box configure capable, can easily set up variety parameters.
● By prog-box, you can set the cut-off voltage between 2.0-3.2V per cell at 0.1V incremental. *
● Timing mode (0-30)degree, at one degree interval *
● PWM: 8/16/32 KHz
● 3 throttle curve modes: LOGARITHMICAL LINEAREXPONENTIA, you can feel different throttle response styles by using different throttle modes *
● 3 accelerating response control modes, SOFT / MEDIUM / HARD. Setup in conjunction with throttle curve modes, you can gain your own ideal throttle curve. *
● Auto detect and setup throttle range, and you can also set to a fixed amount manually by Prog-box. *
● Soft start and governor function.
● Under governor mode, you can set motor poles to 2-4, 6-10, 12-14 *
● Motor reverse function, avoid the annoyance of swapping motor wires.
● Lost signal protection: cut off after 3 seconds when lost signal.
Note: features marked with ‘*’ can only be configured by Prog-box.
Specifications:
· Weight:36 g / 1.27 oz
· Size:54 x25 x7 mm / 2.15 x 0.98 x 0.3 in
· Constant Current:40A
· Max Current: 45A (for ten seconds)
· BEC: No
· PWM: 8/16/32 KHz
· Input: 2 to 5 Li-Po
Includes/Requires:
Includes:
1 x ESC
Primary Additional Accessories for the completion of the HiModel FLY Seires 40A Brushless Speed Control W/Governor for Helicopter Type Heli-FLY-40A
Customer Reviews:
Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for
each)