●Auto detect the cells and type of batteries, and set the cutting-off voltage accordingly, 6V/9V for 2 and 3 cell lipo, and 0.8V/cell for Ni-Mh/NiCd batteries.
●Safe start, it will not start up when throttle at wrong position.
●Over-temperature protection: The ESC will stop working when surface temperature is over 110℃.
●Lose signal protection: The ESC will stop when lost control signal for over 1 second.
· Weight: 12g (excluding wires) / 25g (including wire)
· Size: 45 X 24 X 9（mm）
· Constant Current:40A
· Max Current: 45A (for ten seconds)
· BEC: 2A at 5V
· PWM: 8 Khz
· Input: 4 - 12 Ni-Mh/Ni-Cd or 2 - 3 Lipo
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for