1 Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. 2 Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters. 3 User programmable. 4 Multiple program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field. 5 Compatible with Lipo battery and NiCd/NiMH battery. 6 Internal timing can be changed to be suitable for different brushless motors. 7 Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. 8 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
This version with motor bullet connectors pre-installed. Specification
1.1 Output: Continuous 18A, Burst 22A up to 10 seconds. 1.2 Input Voltage: 2-4 cells lithium battery or 5-12 cells NiCd/NiMh battery. 1.3 BEC: 2A / 5V Linear mode BEC. 1.4 Refresh rate of the throttle signal: 50Hz to 432Hz. 1.5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = BrushLess Motor) 1.6 Size: 55mm*25mm*6mm. 1.7 Weight: 21g. 1.8 motor connector type: bullet type, 3.5mm
Includes: 1 x ESC
Customers who bought the above may also need
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for