- Long life Japanese NMB ball bearings.
- Efficient Japanese Kawasaki 0.2mm stator steel
- 600mm Long silicon wire
- Prop adaptor mounting and direct mounting compatible.

Model: Sunnysky V Series 4010 375KV
KV: 375
Pole number: 18N24P
Outer diameter: Φ 44.5mm
Length: 27.5mm
Shaft diameter: 3.17mm
Weight: 123.5g (including wires)
Idol current: 1A @ 22.2V
Internal resistance: 98mΩ

Application: specially designed for quadcopter and multi-rotor aircrafts.

Model	Propeller (inch)	Voltage(V)	Throttle	Current (A)	Thrust(g)	RPM (RPM/Min)	Power(W)	G/W ratio	Temperature under 100% throttle for 10min.（℃）
V4010KV375	DJI15x5	18.5	50%	2.5	630	3370	46.25	13.6	46
			65%	4.2	910	4050	77.7	11.7
			75%	6.8	1240	4775	125.8	9.9
			85%	8.6	1440	5145	159.1	9.1
			100%	10.9	1690	5580	201.65	8.4
	APC12x3.8		50%	1.7	440	3595	31.45	14.0
			65%	3	640	4280	55.5	11.5
			75%	5.6	960	5100	103.6	9.3
			85%	7.3	1120	5475	135.05	8.3
			100%	9.1	1300	5820	168.35	7.7
	APC12x3.8	22.2	50%	2.4	590	4165	53.28	11.1	52
			65%	4.2	900	4940	93.24	9.7
			75%	7.5	1280	5775	166.5	7.7
			85%	10.2	1540	6295	226.44	6.8
			100%	12.2	1770	6640	270.84	6.5
	DJI15x5		50%	3.4	850	3940	75.48	11.3	54
			65%	5.1	1130	4565	113.22	10.0
			75%	8.9	1650	5525	197.58	8.4
			85%	11.3	1910	5955	250.86	7.6
			100%	14	2220	6380	310.8	7.1
	APC12x3.8	14.8	50%	1.2	290	2900	17.76	16.3	46
			65%	2.1	430	3540	31.08	13.8
			75%	3.5	580	4170	51.8	11.2
			85%	5	750	4595	74	10.1
			100%	6	880	4905	88.8	9.9
	APC14x4.7		50%	1.9	430	2770	28.12	15.3	48
			65%	3.3	610	3310	48.84	12.5
			75%	5.8	920	3965	85.84	10.7
			85%	7.2	1020	4240	106.56	9.6
			100%	9.1	1250	4550	134.68	9.3
	APC13x4	18.5	50%	1.4	330	3765	25.9	12.7	46
			65%	2.1	460	4370	38.85	11.8
			75%	3.5	670	5200	64.75	10.3
			85%	4.8	860	5855	88.8	9.7
			100%	6	1000	6310	111	9.0
	APC14x4.7		50%	2.9	660	3395	53.65	12.3	52
			65%	5.1	980	4045	94.35	10.4
			75%	7.9	1330	4605	146.15	9.1
			85%	10.1	1510	4990	186.85	8.1
			100%	12.8	1780	5350	236.8	7.5
	APC13x4	22.2	50%	2	500	4465	44.4	11.3	48
			65%	2.9	670	5200	64.38	10.4
			75%	4.7	950	6155	104.34	9.1
			85%	6.3	1220	6805	139.86	8.7
			100%	7.8	1370	7290	173.16	7.9
	APC14x4.7		50%	3.7	870	3800	82.14	10.6	65
			65%	6	1170	4465	133.2	8.8
			75%	10	1700	5200	222	7.7
			85%	13.8	1990	5725	306.36	6.5
			100%	16.2	2240	6025	359.64	6.2

Includes:
1 x motor
1 x prop adaptor
1 x holding-down disk (for direct mounting props)

*Connectors are not included

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.