Tags: CORONA_2.4Ghz_Mini_8-Channel_Receiver_M6D8_D8_compatible 

Features:

Corona M6D8 D8 compatible receiver isavailable for any TX that use the Frsky D8 protocol, such as FrSky two waytelemetry modules: DFT, DJT, DHT, XJT, XJT_lite, etc.

Features:


       One SBUS channel for special usage(connect FC or expand servo channel).


That can be set the alarmwarning on low voltage and return signal in the TX.

Specifications:

CORONA 2.4Ghz Mini 8-Channel Receiver M6D8 (D8 compatible)

Specifications:

Dimension: 20X13X3mm

Weight: 2g

Operating Voltage Range:3.5V-10.0V

Operating Current: Ｍax 60mA

Operating Range: Full range1.5km

SBUS Frame Rate: 9ms

 

Bind procedure:

First, turnon the TX and swicth to Bind mode. Second, power on the receiver whileholding the F/S button on the receiver (not connect any servo or other device) and you can see agreen LED going on steady on the receiver. And buzzer begins to sound beebee.The red LED on the receiver will flash, indicating the bind iscompleted. Turn off both the transmitter and the receiver. Turnon the transmitter and power on the receiver. The greenLED that going on steady on the receiver indicates that the receiver isreceiving commands from the transmitter.

 

Fail safe Setting:

  The compatiblereceivers support failsafe set on the receiver. Turn on the transmitter and poweron the receiver. User can press and release the F/S button as pictured and allchannels data will be recorded by the receiver in the first 30s beforereceivers and TX are connected. When operating failsafe setting, it is notrecommended that servos or other devices connect with the receiver. After completingfailsafe setting, a stable power supply to the receiver is recommended.

      Failsafe setting will be cancelled whenresetting the bind procedure

 

LED Status Indication

RED	GREEN	Indication
steady	off	No Signal
off	steady	Good Signal
flash	steady	Not Very Good Signal
flash	flash	Poor Signal

 

Range check:

   We suggest user do a range checkbefore flying any new bind receiver.

Includes/Requires:

Includes:
1 x receiver