Multi-rotor aircrafts and accessories
   Multi-rotors Flight Controller (FC) Power Module for APM2.5/ APM2.6 Flight Controller (No BEC) Welcome Guest  [Sign Up/ Log in]  
   FPV/ Aerial Photography Flight Controller/OSD/ GPS/ Stablizer  
SKU:  APM50A
Power Module for APM2.5/ APM2.6 Flight Controller (No BEC)
Customers rating.
Add To Wish List
Added:2014/04/16
Updated:2014/04/16

Follow Us on:

3A9150554250
 
 
PRICE(USD):
    $6.06   In stock
Member PRICE:
    Sign in or Sign up for member price    
 
QTY:
      
   
  Tags: multi-rotor controller  fly control  flight control  autopilot ARDUPILOT MEGA2.6 

  Features:  

*  Wires & connectors are not soldered nor included, customer need to buy wires/connectors separately and solder themselves. 12AWG silicon wire & T-connector or XT60 connectors is suggested.  

Function:
Testing battery voltage & working current, flight controller receive the data then calculate remaining capacity and remaining flight time.
Parameters are identical with 3DR official version, settings of mission planer can refer to official Wiki setting. 





  Specifications:  

Power Module for APM2.5/ APM2.6 Flight Controller

Voltage supported: up to 50V
Max current: 90A
Dimension: 24 x 22mm
Weight: 4.2g

  Includes/Requires:  
Includes:
1 x power module
1 x cable


  Customer Reviews:  
Average Customer Review: 5 stars   1 customer review(s).   [Write a review/question]

teddycool
Grade:
This module is absent of a BEC daughter board. The two voltage pins give 0 volts. If you wish to add a regulated 5 volts at 2 to 3 amps (which was recommended to power the APM, HK mega or the mini version). Solider the output of a UBEC to the 5v and GND pads on the back of the module. On the input side of the UBEC connect the voltage and ground to the larger pads. It worked for me. I can now power the APM with the supplied cable of the module.
October 03 2014     Was this review helpful to you?   Yes [ 0 ]   No [ 0 ]    [Reply this review]
||| Please Log in with your account first.

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.

Upload Image:  
Post as: Review Question
Select grade: star(s)
Anonymous: Yes No
Average Customer Review: 5 stars   1 customer review(s).   [Write a review/question]

teddycool
Grade:
This module is absent of a BEC daughter board. The two voltage pins give 0 volts. If you wish to add a regulated 5 volts at 2 to 3 amps (which was recommended to power the APM, HK mega or the mini version). Solider the output of a UBEC to the 5v and GND pads on the back of the module. On the input side of the UBEC connect the voltage and ground to the larger pads. It worked for me. I can now power the APM with the supplied cable of the module.
October 03 2014     Was this review helpful to you?   Yes [ 0 ]   No [ 0 ]    [Reply this review]
||| Please Log in with your account first.

Loading...