Front and rear shaft /prop adaptor design.
The rear prop adaptor is detachable.
Specifications:
Model: FC3542-6T
KV (rpm/v): 920
IO(A): 2.3
Ni-Mh Ni-Cd Battery(cell): 8-12.
Lipo Battery (cell): 3 - 4
Max Current (A): 45
Running Current (A): <42
Weight: 135g / 4.76oz
Diameter: 35 mm
Length: 43.3mm without shaft, 60.6mm with shaft
Shaft Diameter(mm): 5
Thrust: 2200g / 77.6 oz
Propeller suggestion: < 12 x 6 inch
Motor mount hole spacing and diameter:
Holes in the motor base: 19mm and 25mm (cross side)
Holes to firewall: 42mm (cross side)
Hole diameter: 3mm
Includes/Requires:
Includes:
1 x motor
1 x cross type motor mount
4 x screws for motor mount
4 x screws for prop adaptor
1 x motor shaft adaptor ring
1 x set screw
3 x bullet connectors
Comments:
Customer feedback:
Propeller suggestion: 12 x 6 inch at 4S; 13x 7 at 3S
Customer Reviews:
Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for
each)