This device allows mixing any channel to other channels and making your aircraft easier to fly.
It is necessary for you to fly the Delta Wing or V-Tail airplane if the transmitter has no mixing control function.
(Ex:Mirage 2000 Fighter, B-2...,etc.)

* High resolution (200 steps) and smooth control response.
* Apply to all of P.P.M. & P.C.M. system. It could be plugged into any input channel of the receiver output and having no interference.

Operating voltage : 4.8V~6V (typical 4.8V)

Resolution : 200 steps

Working Temperature : -5°C~50°C

Weight : 5 g

Dimension : 22x13 mm (0.866x0.512 in)

mixing rate: 1 : 1

Note：

Always be sure to observe the proper housing on the connector pins and receiver sockets. Please install this device as the diagram shown.

1.

Plug the AILE and ELEV connector into the receiver aileron and elevator channels respectively as the wiring diagram shown.
2.

Connect the AILE and ELEV control servos to SERVO 1 & SERVO 2 of the V-tail mixer in accordance with the wiring diagram.
3.

Do not get wet on the V-tail mixer.
4.

Any Modification will void warranty at owner's risk.

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.