- HL disk type motors specially designed for multi-rotor aircrafts. - 3-point bearing design. - Utilizing 0.2mm Silicon steel sheets. - Dynamically balanced at factory, ensures maximum efficiency and low noise. - Higher g/w ratio, very good choice for muti-rotor application. - New prop adaptor design, you can fix the prop with prop adaptor, or mount the new series carbon fiber props directly to the motor without using prop adaptor.
Model: W51-30 350KV Dimension: Φ 51.5x35mm (excluding prop adaptor) Idel current: 0.5A at 7.4V Net weight: 152g (excluding motor mount) Cell number supported: 6S Lipo Max current: 18A Working current: <13A Max power: 400W Internal resistance: 0.099Ω Motor mount hole spacing: 25mm/ 25mm Prop adaptor output shaft diameter: 6mm Suggested prop size: 15 - 16in Suggested ESC: 20-30A
Includes: 1 x motor 1 x prop adaptor 1 x motor mount 6 x M3 screws
Primary Additional Accessories for the completion of the HL W51-30 350KV Outrunner Brushless Disk Type Motor for 800-1000 Class Multi-rotor (6S)
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for