Lithium Polymer (Li-poly) & Ni-Mh battery packs, battery chargers, Electric (Brushless) Motors, Electric Speed Controllers ( ESC ), Gyros, Electric Accessories etc.
* High rate (10 KHz) switching (PWM)
* Six to twelve NiCd, Ni-MH cells or two to four Li-poly cells with receiver.
* Up to ten NiCd, Ni-MH cells or three Li-poly cells with three micro servos.
* Twelve NiCd, Ni-MH or four Li-poly cells MAX (with BEC disabled).
* Powerful direct-drive ability (High-torque drive ability).
* Smooth Linearity of throttle.
* Dynamic braking ensures prompt prop folding.
* BEC (1.0A) provides power to receiver and servos -eliminates separate receiver battery.
* Over temperature protection.
* User Programmable Features.
* Low-voltage protection - the value of low-voltage cutoff can be set at 4.8V,5.6V,6V,7.2V,8.4V,9V,11.2V and 12V .
* Cutoff can be programmed for motor stop or reduced power.
* Brake Type selectable.
* Throttle Range.
* Timing Advance:4 to 10 degree, 10 to 20 degree, 20 to 30 degree to suite different magnet poles motors.
* Safe "power on" arming program ensures motor will not accidentally turn on.
* Low torque "soft start" prevents damage to fragile gearboxes.
* Lost single protection: Auto shut down in 4 sec after signal is lost or radio interference becomes severe.
* Microprocessor controlled.
* PC connection and set up via PC enabled, you can even test your power system via PC software desinged for the ESC.
* Change the rotation by programming
* Motor Jam Protect: When motor jam normally make the ESC broken, HiModel's powerful hardware and software design can protect the ESC not be hurt.
* Over heat protection: ESC will cut-off when temperaturer is higher than 155 degree.
* Over voltage protection: ESC will cut-off when input voltage is higher than 18V.
For more featurers, please visit here.
Programme of the ESC upgraded on 26/12/2005, the compatibility has much improved.
HiModel
28/12/2005
Electric 
