1 Safety arming feature: Regardless the throttle stick position, the motor will not spin after battery connected. 2 Throttle calibration funtion: Throttle range can be calibrated to be compatible with different transmitters. 3 User programmable. 4 Multiple program methods supported: transmitter stick, LED Program Card. Very easy to program the ESC at home or at the flying field. 5 Compatible with Lipo battery and NiCd/NiMH battery. 6 Internal timing can be changed to be suitable for different brushless motors. 7 Full protection: Low voltage cutoff protection / Over-heat protection / Throttle signal loss protection. 8 Extreme low resistance PCB is used at the power output section, the whole ESC has super current endurance capability. 9 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability.
Hobbywing FlyFun Series 30A 2-6S Electric Speed Control ESC FlyFun-40A W/BEC Specification
1 Output: Continuous 40A, Burst 55A up to 10 seconds. 2 Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NiMh battery. 3 BEC: FlyFun-40A: 3A / 5V switching mode BEC. 4 Refresh rate of the throttle signal: 50Hz to 432Hz. 5 Max Speed: 210000rpm for 2 Poles BLM, 70000rpm for 6 poles BLM, 35000rpm for 12 poles BLM. (BLM = BrushLess Motor) 6 Size: FlyFun-40A: 60mm*28mm*15mm. 7 Weight: FlyFun-40A: 38.8g.
Includes: 1 x ESC
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for