Functions
◆ The Accelerator-3S must be used with Maxpro charger X6.
◆ It can balance charge 5 packs of 3s Lipo at the same time without the same pack capacity & cells voltage

Specifications
1. Supported battery type: 3cells Li-Polymer
2. Charge current: 1A /Channel
3. Voltage detection precision: 10mv
4. Charge cut-off voltage: 12.60V
5. Size: 150×60×20mm
6. Balance connector type: HiModel/Align type and TP connector. (two set of balance connectors)

X6 Accelerator is an optional module of Maxpro X6.The Maxpro-X6 Accelerator-3S can charge & balance 1, 2, 3, 4 or even 5 packs at the same time. Regardless of capacity!!
Provided your packs are 3S, you can just plug them in and the Accelerator-3S will do the rest. Its like having 5 chargers running at once! 5 packs of 3 cells Lipo batteries(2000mAh - 2200mAh) will be finished charging in 2 hours with high efficiency.

* To use this accelerator-3s, you need to upgrade your charger firmware to version 2.28 or newer.

Includes:
1 x accelerator-3S
1 x manual

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.