Extremely low resistance (.013 ohms)
High rate (11 KHz) switching
Up to 25 amps continuous current with proper air flow, 35 amp surge
Five to eight cells with four micro servos
Up to ten cells with three micro servos
Sixteen cells max with BEC disabled
Dynamic braking ensures folding props fold properly
BEC (1.5A) provides power to receiver and servos-eliminates need for
a separate receiver battery
User programmable features:
Low voltage cutoff
Over-current protection
Brake type
Throttle range
Timing advance
Cutoff type
Soft start ramp up
Runs motor in forward or reverse
Auto motor in cutoff with reset
Safe power on arming prgram ensures motor will not accidentally turn
on
Low torque soft start prevents damage to fragile gearboxes
Auto shut down when signal is lost or radio interference becomes
severe

Length: 1.5" (37mm)
Width: 1" (25mm)
Height: 3/16" thick (5mm)
Wire Length: 4" (102mm) motor ends 5.5" (140mm) battery end
7" (178mm) servo wire with universal connecter

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.