SKYRC D200 110-240V AC 1-6S 2x10W Balance Charger W/ Soldering Iron D200

SKYRC D200 is a dual output charger, which supports power distribution with AC source. It has new functions, like, Terminal Voltage Control (TVC), Battery Meter, Battery Internal Resistance Meter.

It has software protection, like, Current Limit, Capacity Limit, Temperature Threshold and Charging Time Limit.It supports PC control and firmware upgrade.

Additionally,it has a built in soldering iron that can heat up to 450℃ with heavy duty 60W, the temperature is adjustable from 200-450℃.

Dual Output

SKYRC D200 allows you to charge two different battery packs simultaneously.

Power Distribution

With AC source, if you set the maximum output power of channel A xW, then that of channel B will be yW(y=200-x).

LiHV Modes

SKYRC D200 can charge /dicharge 4.35V LiHV battery.

Soldering Iron

Power: 60W, Temperature Range: 200-450℃ (392-842℉)
Spare tips: pencil tip×1pc,
chisel tip×1pc

	It has a built in soldering iron that can heat up to 450℃ with heavy duty 60W.
	SKYRC D200 has built in cell voltage balancer.
	Current Limit Capacity Limit Temperature Threshold Charging time Limit
	User can store 20 charge/discharge profiles which can be called out without any special program setting.
	User can check battery pack's total voltage, and each cell's voltage.
	User can check battery pack's total internal resistance, and each cell's internal resistance.
	User can use 'Charge Master' controlling and viewing real time data with graphs, also can update firmware with it.
	User can modify the end voltage (for expert only).
	Support LiHV battery.

User can monitor battery pack's total voltage, individual cell voltage etc., and view real time data and graphs of related specs during charging/discharging. Also user can use 'Charge Master' to update firmware.

SKYRC D200 110-240V AC 1-6S 2x10W Balance Charger W/ Soldering Iron D200

	Dimension
	Net Weight		1260g
	Input Voltage		AC100-240V / DC 11-20V
	Charge Circuit Power		DC Input CH A 200W / CH B 100W
	Charge Circuit Power		AC Input 200W (Support Power Distribution)
	Discharge Circuit Power		2 x 10W
	Charger Current Range		CH A 0.1-20A / CH B 0.1-10A
	Discharge Current Range		0.1-5A
	Current Drian for Balancing Port		Max 300mA/cell
	Trickle Charging Current		30mA-300mA & OFF
	LiPo/LiFe/Lilon/LiHV Battery Cell Count		1-6S
	NiMH/NiCd Battery Cell Count		1-15S
	Pb Battery Voltage		2-20V

Includes:
1 x charger with soldering iron D200

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.

Upload Image:
(Up To 5 Files, only .jpg/.gif/.png files are accepted and sizes below 2MB for each)

Post as: Review Question

Select grade: star(s)

Anonymous: Yes No