SKYRC eN5 4 - 8 Cell NiMH/NiCd Charger

SKYRC eN5 NiMH/NiCd Charger is an economic, high quality 100-240V AC charger, designed for charging NiMH and NiCad batteries from 4-8 cells. The circuit power is 50W and max charge current can reach to 5A. There are four kinds of charge current 1A/2A/4A/5A that can be selected. You could select the proper charge current according to battery capacity.

There is one LED indicating the charger status (ready to charge/charging/charge finish). The operation of the charger is also very simple. There is a toggle switch in the charger which can be used to select charge current. After you power on the charger, select the charge current, connect the battery and charger, the charger will start working.

Illustration

Explanation of LED Status

CHARGE LED STATUS	CHARGE STATUS
LED Flashes Green	The Charger is Ready to Charge
LED Glows Red	The Charger is Charging
LED Glows Green	The Charger Finished Charging Process

SKYRC eN5 4 - 8 Cell NiMH/NiCd Charger

Input Voltage: 100-240V,50-60HZ
Output Power: 50W
Charging Current (Selected by Switch): 1A,2A,4A,5A
Battery Type (Selected by Switch):NiMH/NiCd
Battery Cell Count: 4-8S
Current Drain for Balancing: 200mA
1 LED for Charging Status
Dimension: 82.7*140.5*45.7mm
Weight: 305g

Includes:
1 x charger

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.

Upload Image:
(Up To 5 Files, only .jpg/.gif/.png files are accepted and sizes below 2MB for each)

Post as: Review Question

Select grade: star(s)

Anonymous: Yes No