"SeaKing" series ESC is specially designed for boat, so it has the water-cooling system and the whole ESC is waterproof.

● Use top quality electronic components to enhance the current endurance ability of the ESC.
● Special designed for RC boat, with excellent start-up, acceleration and linearity features.
● With water cooling system.
● The whole ESC is waterproof.
● With 2 running modes ("Forward Only" mode and "Forward/Backward" mode).
● With brake function.
● With 8 steps of timing adjustment to get the best compatibility with various of motors.

2.8 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection.

● Output: Continuous current 25A, burst current 90A.
● Input: 4-12 cells NiMH/NiCd or 2-4 cells LiPo. Note1
● BEC Output: 6V/1.5A.
● Resistance: 0.005 Ohm.
● Motor Supported: Sensorless Brushless Motor
● External diameter of the water cooling pipe: 4.0mm
● Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
● Weight: 30g(Without wires)

Note1:
For 4-9 cells NiMH/NiCd or 2-3 cells Lipo: You needn’t change anything of the ESC.
For 10-12 cell NiMH/NiCd or 4 cell Lipo: You must disable the output of built-in BEC, and use a 3A UBEC to supply the receiver.

Programmable Items:

Includes:
1 x ESC
1 x water colling system (pre-installed)
1 x Instruction manual (English)

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.