Fully CNC helicopter Ready-to-Fly combo.
This is the upgrading version (G2) of SJM400, with hardened Aluminum Alloy brass anoded rotor head.
The structurer of weak places have been redesigned and optimized based on the privious verion.

■Aluminum alloy, Carbon and Fiberglass construction.
■Highest machining precision.
■Contains 28 pcs bearings.
■Metal rotor head and tail unit.
■Belt driven tail system.
■Extremely stable.

* THIS COMBO IS NOT PREASSEMBLED, AND ONLY RECOMMENDED FOR EXPERIENCED PILOT.

Rotor Diameter：655mm

Tail blades diameter:110mm

Fuselage dimension: 600*120*200mm

Kit weight：257g ( includes wooden main blades )

Fly weight：540-580g

Gear ratio:1:15:5 and 1:18:5

Includes:
1 x SJM400II 3D Aluminum-Carbon Electric Powered Helicopter Kit
1 x 3800KV brushless outrunner motor
1 x WFLY C 6 channel CCPM radio with receiver ( please specify mode of the transmitter, the mode 1, throttle on left stick will be provided if not specify )
1 x E-sky head lock Gyro type EK2-0704A
3 x Towerpro 9g Micro servos
1 x 5g Micro servo ( tail servo )
1 x HiModel 25A Electric speed controller type HW25S11
1 x 1700mAh/11.1V 20C Lithium Polymer battery pack
1 x E-sky Lipo charger with adaptor EC103A + AC Adaptor (Europe)

Requires:
8 x AA size batteries for transmitter

Saving big buying this selected combo at HiModel, please note that this combo is not preassembled, customers need to assemble yourself.

HiModel 2006/09/28

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.