Special features:

- 2oz copper foil ensures large current capacity.

- 4 layers PCB, main power and BEC are in separated layers, eliminates BEC circuit been affected by the large current main power circuit.

- Integrated with 2 BEC outputs.   5V/ 2A synchronizing rectifier switch BEC;  12V/ 0.5A  linear BEC

- Compatible with frames less than 48mm in width. 


* Do test the BEC output voltage before connect to your other devices.
* XT60 connector is NOT soldered at factory.  

Matek Multi-rotor Power Distribution Board W/ 5V/ 12V outputs, XT60 Connector

Current capacity: 4 x 25A (peak 4 x 30A, 10 seconds)
BEC 5V ripple voltage: 40mV (Vin=16V, Vout=5V@2A)
BEC 12V Linear BEC: very low ripple, no interference to video signal.
Power input: 3-4S  (under 4S input, BEC output can maintain 12V and continuous 500mA; voltage accuracy 2.5%; and when use 3S input, output voltage will be 3S battery voltage minus 1V)
BEC 12V max capacity can supply power to a 12 camera + a 600mW VTX.
Dimension: 52 x 36 x 3mm

Includes:
1 x wiring hub

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.