Real-Time Response Double the resolution of PCM1024, the 14MZ's breakthrough PCM G3 2048 enables servos to pick up even the slightest stick movements. It's the closest to actual real-time response possible, for unprecedented speed and precision. The 14MZ is also backwards- compatible, so pilots can still use 1024PCM and PPM receivers

Large, Color Touch Screen Only one company in the world could make the 14MZ display...it's an engineering triumph in itself. The HGVA screen features crystal clear 640x240 pixel resolution. It uses transflective technology (layered transparent and reflective surfaces) plus adjustable backlighting and contrast for easy visibility, even in direct sunlight. Menu navigations and selections can be made by touching the screen-or use the Dial-N-Key button to scroll and select

Dual Internal Processors The 14MZ takes advantage of two separate internal processors for maximum efficiency and reliability. A custom Futaba processor expertly directs all functions dedicated to flight control. Input for general operating tasks-such as set-up and programming-is processed by Windows CE.

Pre-Programmed Mixes Numerous aircraft configurations are already programmed in-seven wing types, four tail types and three motor types. Just select the needed setup

Servo Grouping Multiple servos controlling a single function can be set up through the transmitter and then plugged into differently adjustable receiver channels (even non-consecutively) without needing a separate servo synchronizer for mixing.

Switch Customizing The eight shoulder switches can be reconfigured to your own preference-just pull out switch and plug in the preferred style, tall or short, button or toggle, spring-loaded or positionable.

R5114DPS Receiver Operates in either Mode A (standard Mode) or if flying a model that generates a lot of RF interference or if flying in an area where interference may occur Mode B (new Mode) may be selected. By using state-of-the-art Ball Grid Array (BGA) layered PC board technology, the 14MZ's R5114DPS 14-channel synthesized receiver is the world's smallest. All pilots will appreciate how easy its WFSS (Wireless Frequency Setting System) makes changing frequencies at busy airfields. It can be done right from the transmitter without changing crystals.

Lithium-Ion Transmitter Battery Even with the 14MZ transmitter's brilliant, full-color display, fliers will enjoy 2-3 hours of operating time per charge from the included 7.4V, 2200mAh lithium-Ion battery pack

Compact Flash Card Data Storage & Transfer Built-in 30-model memory, which can be expanded to 100 models using the supplied Flash memory card. Upload digital images of your aircraft for use as model names on the graphic menu. Create and store audio files enabling you to fly to music or flight call sequences. The transmitter also includes a built-in mic for recording and storing up to 24 voice prompts, such as "Landing gear down" and "Full throttle!" These prompts can be assigned to specific switches and functions so that audio confirmations of proper stick movement are heard through the transmitter's speaker.

Mode: mode 1 (throttle on right hand)

TM-14 RF Module:
●Communication system:one-way communication
●Antenna: 1/2 wavelength di-pole
●Current consumption:150mA maxiumum
●LED (light emitting diodes) indicate the operational status

R6014FS receiver:
Futaba advanced technology allows the R6014FS to be the first 2.4GHz receiver able to utilize all 14 channels. It retains G3 2048 resolution and Futaba Real Time ResponseTM from the 72 MHz version.
●Dual antenna diversity
●Power requirement:4.8v or 6.0v battery or regulated out-put from ESC,etc.
●F/S and Battery F/S function
●Size: 2.06*1.48*0.63 in. (52.3*37.5*16.0mm)
●Weight: 0.72 oz. (20.8g)

* According to manufacturer, this radio equipment is intended for the use only in Asia/Oceania.
Also we only accept bank wire transfer or western union money transfer for new customers for this item.

Includes:
1 x 14MZ transmitter.
1 x TM-14 RF Module.
1 x R6014FS receiver.
1 x CFDP32M data pack memory card.
1 x LT2F2200 7.4V Lithium Ion transmitter battery.
1 x LBC-1D5 Lithium Ion transmitter battery charger.
1 x FBC-32C wall charger for receiver battery.
1 x NR4F1500 NiCd 4.8V receiver battery.
1 x Aluminum case with fully padded interior, two lockable latches and two keys.
1 x Switch harness.
1 x Aileron extension cord.
1 x Y-harness.
1 x Woven adjustable neck strap.
1 x Rubber tipped stylus pen for touch panel, dress nut wrench, 2.5mm and 1.5mm hex wrench.
1 x Instruction manual (English).

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.