6-Channel Digital Proportional R/C System for airplane model
Digital trim
6 Model memory
Servo reversing
Dual rates
Exponential
End point adjustment
4 character model name
Thottle cut

Transmitter: T6EXAP
T6EXAP transmitter with programmable mixing and 6-model memory.
Transmitting on 35MHz band.
Operating system: 2-stick, 6 channel system
Modulation: FM(PPM) and PCM
Power supply: 9.6V Ni-Mh/ Ni-Cd or 12V alkaline battery (not included)
Current drain: 250mA

Receiver: R156F FM micro reveiver
R156F FM 6 cannel receiver
Receiving on 35Mhz band
Intermediate frequencies:455kHz
Power requirement: 4.8V (shared with servo)
Current drain: 6mA (at no signal)
Size: 21.4x33.3x13.1 mm (0.84 x 1.31 x 0.52 in.)
Weight: 0.39oz (11g)
(*Always use the crystal Type 12)

Includes:
1 x 6EXAP transmitter
1 x R156F micro receiver W/crystal

Changing the 6EXAP stick mode:
The transmitter may be operated in four different stick "modes" (1,2,3 &4). The modes determine the functions that will be operated by control sticks. Currently the transmitter is in "mode 1" ( throttle on right hand ) and you can change to different mode when necessary.

To change the mode, simultaneously depress the MODE and SELETC keys, then turn on the power, the current mode will appear on the LCD screen, Push the DATA INPUT lever up or down to change the mode. If a mode is selected that moves the throttle control to the left stick, th throttle detent mechanism will have to be moved as well, this can be done by Futaba Service Center.

HiModel 2006/10/13

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.