8 Channels transmitter
Specification and features
1. Model: WFT08
2. Use in: airplane, helicopter, car and boat
3.Band: 40 MHz
4. Output:≤750mW
5. Current drain: ≤300mA
6. Output pulse: 1000μs-2000μs
7.Modulation: PPM/PCM
8.RF module: individual
9. Power:1.2v×8 (9.6v) Ni-cad/Ni-MH rechargeable batteries
1.5v×8(12v) normal alkalescence batteries
10.Dual rate range: 0%-120%
11.Mix: PROG. NOR. MIX (5 series) PROG.CUR.MIX (2Series)
12.Reverse switch: Ch 1 aileron, Ch 2 elevator, Ch 3 throttle, Ch 4 rudder, Ch 5 Landing Gear, Ch 6 Flap/pitch, Aux 1, Aux 2
13.Low Voltage warning: battery voltage≤8.2v, buzzer buzzes
14.132×64 dots FSTN LCD, Multi-language and Graphical Interfaces Display.
15. PPM/PCM (WFLY specified PCM, only WFLY receiver applied.).
16. Transmitter can be applied to Futaba and JR receiver. Dual conversion receiver (PPM) can be applied to Futaba and JR transmitter.
17.Support Airplane, boat, car and Helicopter.
18. 8-model memory storage.
19. High precision, 32 figures data processing, data display with four effective figures.
20.With at most 8 dots throttle curve and 10 pitch curve.
21. Trainer function/data transfer/simulator jack

TRANSMITTER
MODEL NO.: WFT08
●Band: 40 MHz Channels availability click here
●Output:≤750mW
●Current drain: ≤300mA
●Output pulse: 1000μs-2000μs
●Modulation: PPM/PCM
●RF module: individual
●Power:1.2v×8 (9.6v) Ni-cad/Ni-MH rechargeable batteries
1.5v×8(12v) normal alkalescence batteries

* Both mode 1 & mode 2 are available, mode 2 will be provided by default for international orders, you can specify the stick mode by leaving a message in the Remark field on the last step when place the order.

RECEIVER type: WFR08-P PPM

Includes:
1 x transmitter
1 x RF module
1 x transmitter battery holder
1 x neck strap
1 x simulator adaptor
1 x PPM receiver

* No printed instruction provided with the radio, please download electronic edition manual here.

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.