6EX-Channel Digital Proportional R/C System
Digital trim
6 Model memory
Servo reversing
Dual rates
Exponential
End point adjustment
4 character model name
Thottle cut

Transmitter:6EXHP-PCM
Transmitting on 72Mhz band.
Operating system: 2-stick, 6-channel system
Modulation: FM (PPM) and PCM
Power supply: 9.6V Ni-cd or Ni-Mh battery or 12V alkaline battery
Current drain: 250mA
*Default mode is mode 1 (throttle on right stick), and can be easily changed to mode 2 (throttle on left stick).

Receiver: R136HP

Servos:S3001 standard ball bearing
With mounting hardware and servo arm assortment.
Control system: pulse width control, 1.52ms neutral
Power requirement:4.8V or 6V from receiver
Output torque: 44.4oz-in [3.2kg-cm] @4.8V
Operating speed: 0.23sec/60°@4.8V
Size:1.59x0.78x1.41" [40.4x19.8x36mm]
Weight: 1.3oz (38.0g)

Includes:
1 x 6EXHP-PCM TX
1 x R136HP PCM1024 Receiver
4 x S3001 servos with horns and screws
1 x Futaba NR-4RB Ni-Cd RX battery 4.8V 1000mAh
1 x Futaba NT8F600B 9.6V 600mAh Ni-Cd TX battery pack
1 x RX & TX battery charger type FBC-2J

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.