The net weight of this servo is 3.6g. It can also be rebuilt into a lighter one. With the servo-case bottom removed or using the JST plug, the weight can be reduced to 3.3g. Use the enameled wire to connect, the weight can be reduced by 0.8g. Totally, the weight can be reduced by 1.1g, and finally, you only get a servo only at 2.5g.
Applications: Micro planes, Hand launch gliders, Small electrics helicopters ect.

Supply voltage 4.8V 6.0V
Speed 0.12sec/60degree No load running
Torque 0.4kg.cm(5.55oz.in) 0.5kg.cm(6.0V)(6.9oz.in)
Operating angle 40degree one side pulse traveling 400usec
Direction clock wise/pulse traveling 1500 to 1900usec Operating current 1mA/static current 100mA/operating current Dead band drain 10uses
Connector wire length 160mm
Dimensions 19.6x17.6x8mm
Weight 3.6g(0.13oz.)with JST connect /4.6g(0.16oz.)with JR,FUTABA connect /4.1g(0.14oz.) without connect

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.