The simplest and most advanced 6-channel system available.

The original was a revelation of affordability, proven performance and programming ease, created to ease the transition from 4-channel sport systems into 6-channel computer systems. Today's system offers the original's appeal, 6EXAS and 6EXH enhancements and the revolutionary, interference-free performance of the 2.4GHz FASST System.

Standard Programming Functions :

* Model Select – six model memory.
* Model Type – select airplane or heli programming in one transmitter.
* Servo Reversing – on all six channels.
* Dual Rate/Exponential – for ailerons, elevator and rudder.
* End Point Adjustment – fine-tunes servo throws on all six channels.
* Digital Trim – stores trim settings for each model for aileron, elevator, rudder and throttle.
* Fail Safe – a safety throttle setting in case of loss of transmitter signal.
* Battery Fail Safe – moves the throttle to a preset position when the airborne pack reaches 3.8V.
* Stick Mode – choose from Mode 1 through 4.
* Range Checking – Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away.
* Changeable Throttle Stick – select ratchet for airplanes or smooth for helis.
* Adjustable Stick Length – choose the length that suits your flying style.
Airplane-Specific Programming Functions:

* Wing Mixing – for flaperon, flap trim, V-tail and elevon.
* Trainer System – with the transmitter as either the master or student system. Compatible with other Futaba systems.
* Throttle Cut – pre-programmed for safely shutting off the engine.
* Programmable Mixing (1 & 2) – two different mixes allow any two channels to be combined.

Helicopter-Specific Programming Functions:

* 5-Point Normal and Idle Up Throttle/Pitch Curves.
* Throttle Hold – for autorotation.
* Revo (Revolution Mixing) – mixes rudder and pitch together.
* Gyro Mixing – two gyro gain settings can be programmed and selected during flight.
* Swash to Throttle Mixing – corrects slowing of the engine's speed caused by the swashplate.
* Swashplate Types – choose from 1S (independent aileron, pitch and elevator servos linked to the swashplate), 3S (120° CCPM), or 3E (90° CCPM).
* Swash AFR – Adjustable Function Rate, for use with 1S, 3S or 3E swash types.

The heart of the FASST system is the R617FS receiver: there's no other 2.4GHz receiver like it!
R617FS FASST Receiver
Size: 1.6 x 1.1 x .35" (40 x 27 x 9mm)
Power Requirement: 4.8 - 6V
Current Drain: 80mA (at no signal)
Weight: 0.34oz (9.8g) with case, 0.25oz (7g) without case

Inlcudes:
1 x Futaba 6EX Transmitter 2.4G
1 x R617FS Receiver 2.4G
1 x 900mAh/9.6V TX battery
1 x RX/TX battery charger type FBC-2J
1 x English instruction manual

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.