This is a High Torque, High Speed Digital Mini Servo from Futaba.
Coreless motor-a conventional servo motor has a steel core armature wrapped with wire that spins inside magnets. In a coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of a magnet. This arrangement is much lighter resulting in smoother operation and faster response time.
Designed for 1/12 or 1/18 scale onroad cars such as the HPI Micro RS4, and also best performing tail-rotor digital servo for the t-rex, shogun or any micro heli, this servo works best on 6 volts.
Weight: 9 grams
Torque: 3.6kg-cm @ 4.8V (50 oz-in @ 4.8V); 4.5kg-cm @ 6.0V (62.5 oz-in @ 6.0V)
Speed: .14 sec/60degrees @ 4.8V; .11 sec/60degrees @ 6.0V
Voltage: 4.8-6 V
Length: 43mm between centers of side mounting holes
35.5mm servo body length
42.5mm between the centers of standard mounting holes
Weight: 0.9oz (26g)
Bearing: single ball bearing
1 x digital servo with servo horns
Will NOT work with these Futaba radios (4FG, 5FG/K, 6FG, 6FG/K, 7FG/K
New Terratop, 3EGX, 3PGE, 2NL, 2LGX, 2FR, 2PK series)
These radios have a servo neutral signal of 1310us not compatible with
*For MAXIMUM performance, a 6.0V battery is recommended
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for