1 Dual working modes: Normal mode and Head-lock mode, switched by the sensitivity value of the GAIN channel of your transmitter.
2 Compatible with analog servo and digital servo.
3 User programmable. The programmable items are the followings:
Servo type (Digtal / Analog)
Servo travel direction (Normal / Reversed)
Servo travel limit of normal direction
Servo travel limit of reversed direction
4 Excellent angular rate sensor: The Gyro uses advanced MEMS (Micro Electro Mechanical Systems) angular rate sensor to get super performance.
5 Advanced algorithm: AVCS (Angular Vector Control System) algorithm provides best tail-control performance.
2.6 Built-in temperature compensation: It provides high-precision direction control ability to eliminate the drift caused by environment temperature changing.
7 Completely digitalized to make the gyro more reliable: Each programmable value is adjusted by a SET button without any analog component such as trimming potentiometer.
8 Own intellectual rights: Without any risk of lawsuit.

Specification

1 Input: 4.5-6.5V, operating current = 50mA, maximum current <100mA
2 Size: 26mm*24mm*9mm
3 Weight: 12g
4 Suitable Servo:
Analog Servos (frequency 50Hz), servo neutral point: 1520us
Digital Servos (frequency 333Hz), servo neutral point: 1520us
Note: This gyro is not compatible with following servos:
Futaba- S9251, S9256, BLS251
JR-2700G, 8700G, 810G
5 Accessories:
2 pieces of adhesive foam pads
1 piece of steel plate for vibration isolation

Includes:
1 x GYRO G3
1 x manual

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.