This is the 50W discharge power version.

The Battery Meter/Balancer/Discharger is designed for Li-Polymer and Li-Fe battery, it can measure battery voltage precisely and execute balance work for series batteries, or for battery discharge for long time storage to avoid battery damaged. It can be used as a portable battery meter as it is lightweight, self-contained and with a large display. You can also bring the Balancer to the flying field for battery checking purpose.

The product balance function can allow battery execute balance function before/after charge and using(discharge), also can match-up market string voltage charger to execute devide voltage balancing function while charging.

Specifications：
1. Product specification: LxWxH : 93.5 X 60 X 17 mm
2. Measureable battery type and amount:
--Li-Polymer/Li-Fe 2 ~ 6 (standard voltage 7.4V to 25.2V using divided voltage connector)
--Receiver battery 1.2V to 12V DC
(not limit battery type, but need external power 7.4-25.2V, use JST connector)
3. Balance voltage setting range(lower limit):2.0V ~ 3.9V(pre-setting value 3.3V)
4. Discharge voltage setting range (lower limit):3.0V~ 4.2V(pre-setting value 3.9V)
5. Net weight is 70g without package.

* This device uses a 12V/50W bulb to discharge the battery, the bulb is in high temperature during working, please be cautious and hang/place it in safe place during discharging.

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.