1. X8R9/X8R10 receiver will output corresponding signal in CH 9,CH 10 only when working with transmitter that comes with 9-10 channel under PPM mode(such as JR 9XII transmitter, that with 9chs in PPM mode). That means for transmitter without 9-10 channels under PPM mode(such as Futaba style transmitter,which have 8chs max at PPM mode), X8R9/X8R10 receiver's CH9, CH10 will not deliver.

2. Any receiver need to be binded with the transmitter for the first time being used. Re-bind will be needed when this happened: after you use a X8R9/X8R10 binded to your transmitter and find that the other receivers ( 8 channel or below receivers ) which binded before lost binding or can't be operate correctly, you need use one 8 chs or below Rx binding again. After re-bind, your 8chs or below receivers back to correct control and your X8-R9/R10 can be use too,just with 8chs deliver only, CH9 and CH10 will without signal out. In some special transmitter,such as JR 9XII,which with 9chs signal out at PPM mode and when you want use CH9's signal in one model, you need re-binding your X8-R9/R10 before use it, and when you return to other Rxs which have 8chs or below in other models, you need use one Rx re-binding.

X8R10 is a 10 channels receiver V2.
Compatible with all ASSAN's RF modules.
Size: 60.5 X 31.6 X 12.5mm
Weight: 15g / 0.55 oz
Antenna: 17cm

Includes:
1 x receiver 2.4G V2

Due to each manufacturer have their own coding for the 2.4G RF modules & receivers, you can only use ASSAN receivers together with ASSAN RF modules.
June, 2008

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.