The AR6100e weighs less than 4.9 grams. The AR6100e is compatible with all aircraft DSM2 radios and module systems. It is designed for park flyer use only.

Features

* Super light weight 4.9 grams!
* DSM2 Technology
* Compatible only with DSM2 aircraft radio and module systems
* 6 Channel
* Compact design 36mm x 20mm x 11.6mm

Compatible with DSM2 Radio and Module Systems.
Compatible with JR/Spectrum 2.4G radios.

* Type: Park flyer, Foamies, Up to 400 class helis
* # of Channels: 6
* Modulation: DSM2
* Band: 2.4 GHz
* Dimensions (WxLxH): 20mm x 36mm x 11.6mm
* Weight: 4.9 grams
* Voltage Range: 3.5v - 9.6v
* Antenna Length: 2 @ 30mm each

How to bind?
1.with the power off, plug the bind plug into the BATT port.
2.power on the receiver. if powered by a separate battery,plug the battery into any unused port.
3.Position the transmitter's control sticks and switches in the desired fail-safe positions(normally low throttle and all other controls at netural).
4.press and hold the bind button on the back of the transmitter while turning on the transmitter. the button will flash for several seconds, then the LED on the transmitter and receiver will remain solid on, indicating a successful bind.
5.remove the bind plug to prevent the system form rebinding the next time the power is turned on.

Includes:
1 x DSM2 receiver only

*This receiver only come in a foam bag, and no instruction manual or other accessories.
*No binding plug.

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.