 Buzzer prompts ignition status ( buzzer sound is loud or quiet depending on different types of fire)
 Integrated large current switch and a three led segment display the battery voltage
 Using ultra high brightness led segment which can clearly visible in the sunshine.
 Using switch channel of the remote control to control the igniter (usually use the fifth channel)
 The engine starts, turn off the ignition to avoid attempting a long time power and shorten the life of even burned

3-in-1 15A Switch Harness W/ Nitro engine igniter


 working voltage: 4.2—13V
 Working current of the switch: 0-15A
 operating current of the igniter:0-5A
 output voltage of the igniter:1.5V
 Weight: 60g(include the wire)
 Volume: 40mm ( L ) * 22mm ( W) * 34mm ( H )

Attentions:
 Not allowed to counter-battery polarity.
 Do not come into contact with installation of grease or water, or near a corrosive substance.
 Please use the low resistance, large capacity battery, because starting ignition requires relatively large current.

Includes:
1 x 3-in-1 switch

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.