* High rate (10 KHz) switching (PWM)
* Six to twelve NiCd, Ni-MH cells or two to four Li-poly cells with receiver.
* Up to ten NiCd, Ni-MH cells or three Li-poly cells with three micro servos.
* Twelve NiCd, Ni-MH or four Li-poly cells MAX (with BEC disabled).
* Dynamic braking ensures prompt prop folding.
* BEC (1.0A) provides power to receiver and servos -eliminates separate receiver battery.
* Over temperature protection.
* User Programmable Features.
* Low-voltage protection - the value of low-voltage cutoff can be set.
* Cutoff can be programmed for motor stop or reduced power.
* Brake Type.
* Throttle Range.
* Timing Advance.
* Safe "power on" arming program ensures motor will not accidentally turn on.
* Low torque "soft start" prevents damage to fragile gearboxes.
* Auto shut down in 4sec after when signal is lost or radio interference becomes severe.
* Microprocessor controlled.
* Change the rotation by programming


For more featurers, please visit here.

MODEL:HM-5A
CURRENT: 5amp
SURGE: 8amp
BEC: 1amp
SIZE: 22.5*21*4(mm) / 0.88*0.82*0.16(in)
WEIGHT (WITH WIRES): 7g / 0.25oz

Download the PC Software here

Download USB Driver here

Programme of the ESC upgraded on 26/12/2005, the compatibility has much improved.
HiModel
28/12/2005

Please explain:
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.